CDL Venturi Owner'S Manual Download Page 14

14

CDL Maple Sugaring Equipment inc.

13. If the product was damaged by abusive use, negligence, accident caused by the customer, 

modification made by the customer, variation in the electric power.

14. Damage cause by the use of products that are not meant for use with our equipment or a 

bad use of a product as acids, cleaning products.

15. Use of painted wood or any wood containing chemicals, glue or any other added agent.

16. Use of any other burning agent than wood.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be repair or replacement 
as provided herein.  Claims based on implied warranties, including warranties of merchantability 
or fitness for a particular purpose, are limited to two years or the shortest period allowed by law, 
but not less than two years.  CDL shall not be liable for consequential or incidental damages 
such as property damages and incidental expenses or loss or revenues caused by any event 
covered by this warranty.  Some states and provinces do not allow the exclusion or limitation of 
incidental or consequential damages, or limitations on the duration of implied warranties, so 
these limitations or exclusions may not apply to you.  This written warranty gives you specific 
legal rights.  You may also have other rights that vary from states to states.

If you need service

Keep  your  receipt,  delivery  slip  or  some  other  appropriate  payment  record  to  establish  the 
warranty period should service be required.  If service is performed, it is in your best interest to 
obtain and keep all receipts.  Service under this warranty must be obtained by contacting CDL 
at the addresses or phone numbers below.

Obligations  for  service  and  parts  under  this  warranty  will  be  performed  by  CDL  in  Canada.  
Products features or specifications as described or illustrated are subject to change without 
notice.

 

Les Équipements d’Érablière CDL

 

257, route 279

 

Saint-Lazare-de-Bellechasse

 

Québec, Canada  G0R 3J0

 

418 883-5158 | cdlinc.ca

CDL USA
3 Lemnah Drive
St. Albans, VT, 05478

(802) 527-0000 | cdlusa.com

Summary of Contents for Venturi















Reviews: