background image

16

CDL Maple Sugaring Equipment

14. Damage cause by the use of products that are not meant for use with our equipment or a 

bad use of a product as acids, cleaning products.

15. Use of painted wood or any wood containing chemicals, glue or any other added agent.

16. Use of any other burning agent than wood.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be repair or replacement 
as provided herein.  Claims based on implied warranties, including warranties of merchantability 
or fitness for a particular purpose, are limited to two years or the shortest period allowed by law, 
but not less than two years.  CDL shall not be liable for consequential or incidental damages 
such as property damages and incidental expenses or loss or revenues caused by any event 
covered by this warranty.  Some states and provinces do not allow the exclusion or limitation of 
incidental or consequential damages, or limitations on the duration of implied warranties, so 
these limitations or exclusions may not apply to you.  This written warranty gives you specific 
legal rights.  You may also have other rights that vary from states to states.

If you need service

Keep  your  receipt,  delivery  slip  or  some  other  appropriate  payment  record  to  establish  the 
warranty period should service be required.  If service is performed, it is in your best interest to 
obtain and keep all receipts.  Service under this warranty must be obtained by contacting CDL 
at the addresses or phone numbers below.

Obligations  for  service  and  parts  under  this  warranty  will  be  performed  by  CDL  in  Canada.  
Products features or specifications as described or illustrated are subject to change without 
notice.

Les Équipements d’Érablière CDL
257, route 279
Saint-Lazare-de-Bellechasse (Québec)  G0R 3J0 
Canada  

418 883-5158  |  1 800 361-5158

cdlinc.ca

CDL USA
3 Lemnah Drive
St. Albans  VT  05478
United States

802 527-0000  |  1 800 762-5587

cdlusa.com

Summary of Contents for HOBBY PRO

















Reviews: