CD42 Pipeline Pig Location & Tracking System
Page 29
Figure 36
Printer Error Message
When the File Image completes printing it should resemble the PICture file stored in the CD42.
The PICture file information also prints out with the File Image. This information includes the
file date/time, the Location ID, what type of antenna was used, the gain setting, and the duration
of the recording. There is also an area for the operator to record any notes that may apply to the
File Image printout.
When the File Image has completed printing, the CD42-R returns to the file list display, where
another File may be selected for printing if so desired. Press the Back button to return to the File
Submenu, and once more to return to the Main menu.
Complete Recording File List
In addition to printing a single file image, an option is available to print a list of all currently
recorded pig passages. This option prints the recorded details for each file. It prints the
time/date, the Location ID, the type of antenna , the gain setting of the CD42-R , and the
duration of the recording.
The List All report is accessed by pressing the Print button on the File Submenu. When the
“Print Which?” option screen is displayed, press the List All button. If the printer is online and
connected, it will immediately begin printing the PICture recording file list. If the printer is not
online, the operator will instead receive an error message (Figure 36). Press any button to clear
the error message and return to the File Submenu screen. Correct the printer error and try again.
When the List All report has completed printing, the CD42-R returns to the file list display,
where a PICture File may be selected for printing if so desired. Press the Back button to return
to the File Submenu, and once more to return to the Main menu.
Setup Menu
There are several options that the operator may choose when setting the CD42-R unit up for field usage.
These various options are described in the following sections in detail.
