manualshive.com logo in svg

CDA WC680, Installation, Use And Maintenance Manual

Share
Download
CDA WC680 Installation, Use And Maintenance Manual Download Page 23

23

Programme Listing

Programme

Detergent  

A: 5cm³

B1: 15cm³
B2: 25cm³

Duration 

(min)

Description

Fastest programme for lightly soiled and recently used dishes. 

Suitable for 4 place settings.

Quick 30’

B2

30

For lightly soiled dishes and a quick wash. 

Eco (Reference)

A+B2

179

Standard programme for normally soiled, daily-used dishes.

Super 50’

A+B2

50

For normally soiled, daily-used dishes with a faster programme.

Hygiene

A+B2

154

High-temperature, disinfecting programme for heavily soiled dishes.

Auto Delicate

B2

64-91

Auto programme for normally soiled, delicate dishes.

Auto Normal

A+B2

100-132

Auto programme for normally soiled dishes.

Auto Intensive

A+B2

111-179

Auto programme for heavily soiled dishes.

Super quick

A+B2

14

Please note:

•

  

 

The programme duration may change according to the amount 
of dishes, the water temperature, the ambient temperature and 
selected additional functions.

•

  

 

Only use powder detergent for short programmes.

•

  

 

Short programmes do not include drying.

•

  

 

To assist drying, we recommend slightly opening the door after 
a cycle is complete.

Summary of Contents for WC680





































Reviews:

No comments

Brands by name

Popular brands

Load more brands