CDA SK451, Installation Manual, Page: 17 / 32

17
the option required then confirm by touching the “ok” key for each
selections.
At the end of the process the oven displays the set cooking time; this
may be adjusted up or down using the “+” and “-” keys, then the “ok”
to confirm. Press the “Start” key
to start the programme running.
For some programmes the oven determines that a period of
preheating is required. In this case the message “PREHEAT” will
show on the display; this is replaced with the message “PREHEATING
FINISHED PUT IN THE DISH” when the required temperature has
been reached. Insert the dish at this stage.
At the end of cooking, the display will read “PROGRAM FINISHED
REMOVE THE DISH” and the oven will beep until you press any key.
Note: at any stage of the setting process if you make a mistake
choosing the values and/or you want to change the settings of your
recipe, touch the “Stop” key
to cancel it and allow you to start
again from the beginning of the procedure.
If a change to the settings for a programme has been made the oven
gives you the opportunity to save this as a “Personal recipe” at the
end of the cooking time.
Personal recipes can then be selected for future use next time.