CDA SK451, Installation Manual, Page: 14 / 32

14
Use of the Food Probe
The food probe is a thermometer which, when inserted into your food
in the oven, makes it possible to check its internal temperature and
use it to establish when it is cooked through.
Using the food probe
1. The probe must be plugged into the oven before the oven is
switched on.
2. Locate the food probe socket, situated in the top front corner of
the oven cavity, protected by a metal cover.
3. Lift the metal cover.
4. Push the plug in as far as it will go. If it is correctly inserted, the
oven will beep.
5. Push the probe into the centre of the food, avoiding touching
bones or fatty areas.
6. Select the cooking programme you require as described above,
and set the cooking temperature.
7. After 5 seconds the temperature display will switch to the probe
setting. Use the keys to adjust this as required.
8. After a further 5 seconds the oven
will start.
9. When the probe detects that the
food temperature has reached its
set temperature the oven will switch
off, beep and display the message
“PROGRAM FINISHED REMOVE
THE DISH”.
fig. 3