32
Inside of Oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical
cleaners may be used after first consulting with the manufacturers recommendations and testing a small sample of
the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surface.
NOTE: The manufacturers of this appliance will accept no responsibility for damage caused by chemical or abrasive
cleaning.
Let the oven cool down and pay special attention not to touch the hot heating elements inside the
oven cavity.
Assembling and Dismantling of the Side Runner Frames
– Fit the side runner frames into the holes on the side walls inside the oven (Fig. 23).
– Slide into the guides, the shelf and the tray (fig. 24).
The rack must be fitted so that the safety notch, which stops it sliding out, faces the inside of the oven; the guard
rail shall be at the back.
– To dismantle, operate in reverse order.
Fig. 23
Fig. 24
Guard rail
Stop notch
