CDA RC9020, Operating & Installation Instructions Manual

Page: 19 / 48

19
Fig. 17 Fig. 18
How to use the Conventional oven
General features
As its name indicates, this is an oven that presents particular features from an opera-
tional point of view.
The conventional oven is provided with 3 heating elements which are:
– Bottom element 800 W
– Top element 700 W
– Grill element 1450 W
Note:
Upon first use, it is advisable to operate the oven at the maximum temperature (ther-
mostat knob on position 250) for 60 minutes in the position
and for another 15
minutes in the position to eliminate possible traces of grease on the heating ele-
ments.
Thermostat knob
(Fig. 18)
This only sets the cooking temperature and does not switch the oven on.
Rotate clockwise until the required temperature is reached (from 50 to 250°C).
The light between the thermostat and the function selector will illuminate when the
oven is switched on and turns off when the oven reaches the correct temperature.
The light will cycle on and off during cooking in line with the oven temperature.
ATTENTION - MOST IMPORTANT
Pay special attention not to touch
the hot heating element inside the
oven cavity.
WARNING:
The door is hot, use the handle.