background image

2

Important

This appliance is designed and manufactured solely for the cooking of domestic (household) food and 
is  not  suitable  for  any  non  domestic  application  and  therefore  should  not  be  used  in  a  commercial 
environment. 

The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a semi 
commercial, commercial or communal environment.

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation 
of  this  product.  Please  note  that  CDA  reserve  the  right  to  invalidate  the  guarantee  supplied  with  this 
product following incorrect installation or misuse of the appliance.

Appliance Information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in 
the event of a fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

Important  Information  for  Correct  Disposal  of  the  Product  in  Accordance  with 
EC Directive 2002/96/EC.

 

At the end of its working life, the product must not be disposed of as urban 
waste.  It  must  be  taken  to  a  special  local  authority  differentiated  waste 
collection centre or to a dealer providing this service.
Disposing  of  a  household  appliance  separately  avoids  possible  negative 
consequences for the environment and health deriving from inappropriate 
disposal  and  enables  the  constituent  materials  to  be  recovered  to  obtain 
significant  savings  in  energy  and  resources.  As  a  reminder  of  the  need  to 
dispose  of  household  appliances  separately,  the  product  is  marked  with  a 
crossed-out wheeled dustbin.

Declaration of CE Conformity 

 

This cooktop has been designed, constructed and marketed in compliance with:
 - Safety requirements of EU Directive “Low Voltage” 2006/95/EC;
 - Protection requirements of  EU Directive “EMC” 2004/108/EC;
 - Requirements of EU Directive 93/68/EEC.

Summary of Contents for HVN 32 Series

























Reviews: