CDA HVG95, Manual For Installation, Use And Maintenance

Page: 17 / 36

17
Figure 14
A
B
Figure 15
Figure 16
Figure 17
Flame
failure
probe " T "
Ignitor " S "
The triple ring burner must be correctly
positioned (see fig. 14); the burner ribs
must be fitted in their housing as
shown by the arrow.
The burner correctly positioned must
not rotate (fig. 15).
Then position the cap “ A ” and the ring
“ B ” (figs. 15 - 16). They shall be level.
✓
The pan support shall be correctly
positioned as indicated in fig. 17.
The pan support shall be level and
must not rotate.
Be sure not to fit the auxiliary, semi-
rapid or rapid burner pan support on
the triple-ring burner. The auxiliary,
semirapid or rapid burner pan sup-
port IS ONLY to be used on the auxil-
iary, semirapid or rapid burners.
MODELS WITH TRIPLE RING BURNER -
CORRECT POSITIONING OF THE TRIPLE RING BURNER