11
Correct Positioning of the Triple Ring Burner
–
The triple ring burner must be correctly positio-
ned (see fig. 11); the burner ribs must be fitted in
their housing as shown by the arrow. The burner
correctly positioned must not rotate (fig. 12).
–
Then position the cap “
A
” and the ring “
B
” (figs. 12
and 13). They shall be level.
–
The pan support shall be correctly positioned as
indicated in fig. 14. The pan support shall be level
and must not rotate.
Be sure not to fit the auxiliary, semirapid or rapid
burner pan support on the triple-ring burner. The
auxiliary, semirapid or rapid burner pan support
IS ONLY to be used on the auxiliary, semirapid or
rapid burners.
A
B
Flame
failure
probe “
T
”
Ignitor “
S
”
Fig. 14
Fig. 13
Fig. 12
Fig. 11
Summary of Contents for HVG 4Q5 Series
Page 7: ...7 Fig 6a Fig 6b ...
Page 23: ...23 ...