CDA HNG7410FR, Installation, Use And Maintenance Manual, Page: 14 / 40

14
Timer
The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between a minimum of one minute
and a maximum of 99 minutes.
To set the timer
• Touch the “Zone selection point” for the zone required to activate
its setting mode.
• Use the “Circular slider groove” to select the power level required.
• Touch the “Timer” key a few times to select the tens of the time
required: The “Timer” display shows “00”, “10”, “20”, “30”, ”40”......
• When the required number of tens shows, use the “Circular slider
groove” to select the units of the time required: The display shows
“x1”, “x2”, “x3”, ”x4”......
• When the required number of units shows, wait for five seconds
and the timer will be set.
• At the end of the set cooking time the zone switches off, also the
“Timer” key flashes “00” and the hob beeps.
To cancel the beeper: touch the “Timer” key once.