14
zone the subsequent timer adjustment will affect.
•
Next, use the timer plus setting sensor (7) and the timer minus
setting sensor (5) to set the desired timer duration.
The timer is
increased in 1 minute increments per each press of the + or -
sensors. If you hold your finger down on either sensor, after
a few seconds, the time will increase by 5 minute increments.
Continuing to hold your finger down will increase the time by 10
minute increments.
To set the timer on multiple zones
•
To time each zone when multiple zones are running, set the time for
one zone, as per the section ‘To set the timer’.
Wait for
approximately 4 seconds for the time to engage and begin
counting down before switching zones. The timer display (6) will
revert to the soonest time to end.
•
Touch the timer minus and plus setting sensors (5 & 7) repeatedly
to cycle through the zones until the timer activity indicator for the
desired zone is lit. Each press will cycle the zone timer one zone to
the right. The zone for which timer adjustment is active will display
a bright clock symbol. Any zones which already have a timer set will
display a dimly lit clock symbol.
•
Next, use the timer plus setting sensor (7) and the timer minus
setting sensor (5) to set the desired timer duration.
Wait for
approximately 4 seconds for the time to engage and begin
counting down before switching zones. The timer display (6) will
revert to the soonest time to end.
To cancel the timer
•
If multiple zones are in use then you will need to touch the timer
