14
5)
Take your fingers away from the keys and press again the [ - ] key during a few
seconds until some [ E ] appear.
6)
You will hear a "beep" sound and the [ E ] will blink.
7)
The [ E ] are automatically transformed into [ C ] → The configuration has been
cancelled.
VI)
How to configure the hob?
1)
Use a suitable induction pot with a minimum diameter size of 16cm.
2)
Select the heating zone by pushing the corresponding [ + ] key.
3)
Put the pot on the corresponding heating zone.
4)
Wait until [ C ] converts to [ - ]. The zone is configured
5)
Use the same procedure for each other heating zone which displays [ C ]
6)
The configuration is made if all zones are detected and if nothing is displayed
Use only 1 pot to configure the hob.
Never put two or more pots on the heating zones during the configuration.
If [ E 4 ] display persists call the After-sales Service
The hob or the cooking zone doesn’t start-up :
The hob is incorrectly connected to the electrical network.
The protection fuse has cut-off.
The locking function is activated.
The touch keys are covered with grease or water.
An object is covering a key.
The control panel displays [ U ] :
There is no pan on the cooking zone.
The pan is not compatible with induction.
The diameter of the base of the pan is too small.
The symbol [ C ] or [ E ] displays
Switch the hob off at the mains and then switch it back on.
Call the After-sales Service
One or all cooking zones have cut-off:
The safety system activated.
The cooking zone has been on for a long time.
One or more touch keys are covered.
The pan is empty and the base has overheated.
The hob also has an automatic reduction of power level.
Continuous fan activity after switching off the hob
This is not a failure, the fan continues in order to protect the electronic devices.
The fan will stop automatically.
The automatic cooking system doesn’t start-up:
The cooking zone is too hot for the function to engage [ H ]
The highest power level is set [ 9 ]
The cooking level was engaged with [ - ]
The control panel displays [
] or [ Er03 ] :
An object or liquid is obstructing the control keys. The symbol disappears as soon as the
key is released or cleaned.
The control panel displays [ E2 ] :
The hob has overheated, let it cool and then turn it on again.
