CDA HN6850FR Manual Download

Page: 29 / 32

Live L: BN - brown

Neutral N: BU - blue

Earth PE: GNYE -green/yellow

Fig. 9

Mains electricity connection

•

Warning! This appliance must be

earthed.

•

We recommend that the appliance is

connected by a qualified electrician, who
is a member of the N.I.C.E.I.C. and who will
comply with the I.E.T. and local regulations.

•

This appliance is intended to be

connected to fixed wiring and is not
suitable for connection to a 13A plug or
13A supply.

•

This appliance is intended to be

connected to fixed wiring by a double
pole switch, having a contact separation of at least 3mm in all
poles. The switch must be positioned no further than 2m from
the appliance.

Please note:

•

The mains cable must only be replaced by a qualified electrician
or service engineer and must be of equivalent or better rating (i.e.
4mm2, HO5VV-F).

•

This appliance is intended to be connected to the mains supply

with a cable of cross sectional area 4mm2.

•

The current rating of the fuse or circuit breaker protecting this

appliance should be marked on the socket outlet.

•

Assembly and electrical connection should be carried out by
specialised personnel.

•

When installing this product we recommend you seek the help of

another individual.

Summary of Contents for HN6850FR

































Search results

Summary of Contents for HN6850FR

Reviews:

Related manuals for HN6850FR

Brands by name

Popular brands

CDA HN6850FR, Manual

Search results

Summary of Contents for HN6850FR

Reviews:

Related manuals for HN6850FR

Brands by name

Popular brands