17
Gas Supply Requirements
IMPORTANT: THIS APPLIANCE MUST BE FITTED BY A GAS SAFE
REGISTERED FITTER OR OTHER SUITABLY QUALIFIED PERSON.
• This installation must comply with the Gas Safety (installation
and use) Regulations 1984.
• This appliance is category II2H3+ and is designed for use in
the UK and Ireland. The installation must comply with the Gas
Safety (installation and use) Regulations 1984.
• The CDA Group Ltd is not legally able to provide any assistance
in the installation of gas appliances except to Gas Safe
registered installers. Any Gas Safe registered fitter requiring
help must provide their name, address and registration number.
Information supplied will be validated before help is provided.
• In the event that this appliance is not installed in accordance
with the above requirements, the appliance may be
disconnected from the mains gas supply until any faults are
rectified; this is a legal requirement.
• This appliance should be installed using 15mm copper pipe
connected via a shut-off valve in an adjacent unit. The shut-off
valve needs to be accessible in an emergency or for service
purposes.
• This appliance must not be connected to a combustion gas
recovery scavenging system
• The connection to the gas supply must comply with all current
regulations in force.
• We are not legally able to offer advice on the installation of gas
appliances to non Gas Safe registered personnel.
Summary of Contents for HG6001SS
Page 50: ...26 NOTES...
