CDA he6050ss Manual For Installation, Use And Maintenance Download Page 9

9

Care and Maintenance

The hob has a stainless steel surface, you should use a non-abrasive 
cleaner. Any abrasive cleaner (including Cif) will scratch the surface and 
could erase the control panel markings. Stainless steel can be effectively 
cleaned by simply using a dilute solution of water and washing up liquid 
and drying to a shine with a clean cloth.

Over time with use, the stainless steel surface may discolour; this is 
normal and does not constitute a fault with this appliance. Proprietary 
stainless steel cleaners are available.

IMPORTANT

:

Steam cleaners must not be used when cleaning these appliances.

HOTPLATE CARE:

The finish of the cast iron hotplates is designed to be durable in use. The 
following tips should be observed to get the best from your hob:
1.  Do not use decorative covers; these can cause damage to the surface 

and lead to rust.

2.  Use a special hotplate surface cleaner to protect and restore the 

surface of the hotplates.

3.  Do not use soap and water on the hotplates. Wipe up spills and 

splashes immediately.

4.  Never operate the hob without a pan, unless it is for a few seconds (as 

below).

5.  Deposits of fat can be burned off by turning the hotplate on for a few 

seconds. The fat will brush off when the appliance has cooled down.

Summary of Contents for he6050ss

















Reviews: