CDA hc3620, Manual For Installation, Use And Maintenance, Page: 11 / 24

11
When the timer is set, it will begin to count down immediately. The
display will show the remaining time.
When the set time is reached the buzzer beeps for up to 30
seconds and the timer indicator shows “- - “.
To cancel the beep touch either the
or control.
To cancel the timer (at any point) touch the
and controls
together, the timer is cancelled, and ”--“ will show in the minute
display.
Setting the Timer to Turn One Cooking Zone Off
Touch the heating zone selection control (for example back ).
Touch the timer control
, the timer indicator will show “10”.
Adjust the time setting by touching the
and controls.
Touch the
or control of the timer once to increase or
decrease by 1 minute.
Touch and hold the
or control of the timer to decrease or
increase in 10 minute increments.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minutes.
Note: The red dot next to power level
indicator will illuminate, indicating that
zone is selected.