CDA FWV460, Manual For Installation, Use And Maintenance, Page: 5 / 12

The Icemaker
To make ice
The icemaker will make ice automatically once it is switched on and will continue to make ice until the ice compartment is
full. Whenever ice is removed, the icemaker will make more ice until the compartment is full again.
To dispense water
The amount of water dispensed from the water nozzle is controlled by three different buttons.
Button 3 – water glass
Button 4 – water jug
Button 5 – manual setting – this button dispenses water as long as the button is pressed.
The water nozzle is height adjustable for ease of use. To adjust the height, hold the black outer section of the water
nozzle and raise or lower it to the height required. The nozzle will automatically remain at the height set.
To change the preset buttons
It is possible to adjust the amount of water dispensed by the preset buttons (buttons 3 & 4). To do so, place a glass or jug
under the water nozzle and press button 5 until the required amount has been dispensed. Then confirm the setting by
pressing buttons 3 & 6 for the water glass button or buttons 4 & 6 for the water jug button.
Please note:
To stop water dispensing once a preset button has been pressed, simply press the button again.