CDA FWV460 Manual For Installation, Use And Maintenance Download Page 2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. 
Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation 
or misuse of the appliance.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably  
qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault 
with your appliance and to register your appliance for guarantee purposes.

  Appliance Model 

  Serial Number 

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 
2006/95/EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including 
Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with 
food conform to EEC/89/109.4

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC 
DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local 
authority differentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health 
deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in 
energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with 
a crossed-out wheeled dustbin.

Please note:

This appliance is designed solely to produce ice cubes and dispense chilled water.  Other types of use are not permitted 
and may prove dangerous.  The CDA Group Ltd will not be held liable for any damage caused by incorrect use of  

 

the appliance

  

Read all instructions thoroughly before use.

  

Before first use, you must allow the icemaker to settle for at least twenty four hours prior to switching the power on.

  

To protect against fire, electrical shock and injury to persons do not immerse cord or plugs in water or other liquid.

  

The use of accessory attachments not recommended by The CDA Group Ltd may result in fire, electric shock or injury.

  

If the appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary  

 

damage to the compressor.

Summary of Contents for FWV460













Reviews: