18
8
7
Reversing the door
It is possible to reverse the door on this
appliance, if required.
We recommend
the help of at least one other individual
throughout this process. Protect the
area beneath the door with several clean
towels or similar protective means. Do
not tilt the appliance further than 90°
during this process. Allow the cooler
to settle for at least 8 hours before
switching on after tilting.
1. Unscrew the four screws (1) and then
remove the plinth (see page 19).
2. Remove the bottom hinge plates (3,4)
by unscrewing the eight lock screws (5).
Be careful to hold the door to prevent
damage
. (Fig.7)
3. Gently lower the door to remove it from
the top hinge and place it on a padded
surface to avoid damage. Remove the
top hinge (11 or 12 in Fig. 10).
4. Pop out the cover caps on the left hand
side of the cabinet and use them on the
now exposed screw holes.
5. Screw the alternative hinge included in
the fittings on the left hand side of the
Fig. 8
3
5
4
6
Fig. 7
1
2
Door
Base
Appliance tilted 45°
Fig. 6
Summary of Contents for FWC881BL
Page 1: ...FWC881BL Wine cooler Installation use and maintenance ...
Page 26: ...26 Notes ...
Page 27: ...27 Notes ...
