26
Fitting the trims and
cover pieces
1. Open the door and lift out the
decorative covers (marked ‘a’) in figure
20
2. Remove the position guides (d), turn
them round so that the lip at the
top faces outwards and insert them
into the slots shown in the image
(e); these will be used to line up the
fascia panels before securing them
in position.
3. Line up the fascia panel against the
housing unit to determine where
they need to be when installed and
position the guides to the top of the
fascia panel. Once this has been
performed do not move the position
guides.
4. Remove the mounting bracket (c)
after removing the fixing nuts (b) and
lay the mounting brackets with the
guides in position over the underside
of the fascia panel, as shown in figure
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
Cupboard door
Refrigerator door
Cabinet door