21
At this stage ensure that the product is centrally aligned within the
housing and then remove the guide pieces from the hinges.
10. Securing the product to the housing:
Secure the product to the housing at the hinge side by using two
screws in each hinge. The fixing holes in each hinge as shown in
figure 10.
11. Securing the bottom fixing bracket:
With the lower guide piece in place slide the lower bracket against
the housing unit and tighten the two screws to lock the bracket
in position (use a good quality screwdriver of the correct size for
this). When done, secure the bracket to the cabinet side wall with
a single screw, then snap off the guide piece and fit the bracket
cover trim.
12. Securing the product to the top shelf:
Finally, secure the product to the top support shelf using the fixing
brackets fitted in step 2. When done, push the front shelf trim into
position to cover the fixing brackets and any gaps.