8
Changing the (circular) charcoal filter (re-circulating only):
To ensure best performance of your extractor, you should replace the
charcoal filters every four to six months,
depending on use.
Please note the charcoal filter cannot be washed.
To attach a new charcoal filter, follow the steps below:
1. Remove the cover panel (acrylic filter model) or grease filter
(aluminium filter model) as described above.
2. Place the charcoal filter on the centre of the motor support, and
once firmly located turn the charcoal filter clockwise 90º until the
charcoal filter locks into position.
3. Replace the cover panel or grease filter that has been removed.
Changing the light
ENSURE THAT THE POWER TO
THE EXTRACTOR IS SWITCHED
OFF AT THE MAINS. DO NOT
CHANGE THE LIGHT BULB
IMMEDIATELY AFTER USE AS
THE BULB WILL BE HOT.
ALLOW IT TO COOL BEFORE
REMOVING IT.
Replaceable (LED only) light
source by an end-user
LED
LED
Fig.1-I
Fig.1-II
Fig.1-III
E14 LED 4Wx1
DR-4-H-E14-37
