9
55
553
23.5
Adjacent Cabinet
Installation
1. Mark the positions of the fixing holes on the wall using the dimensions shown above.
2. Drill and plug the wall with appropriate fixings, suitable for the wall type you are fixing the extractor on.
3. Mount the brackets and securely tighten
4. Hang the hood on the brackets and adjust the brackets and height to suit. The adjustment mechanism is shown below
5. Once the hood is levelled and square against the wall, adjust the bottom panel as required
6. Secure the extractor to the adjacent units through the holes in the side of the product, to ensure that it cannot be
accidentally knocked off the hanging brackets.
Fig. 3
55
Fig4
Fig. 5