5
Changing the Light
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO
COOL BEFORE REMOVING IT.
Remove the cover panel as described above, unscrew the light bulb and replace the light with the required light bulb as
shown in the table below. Finally, replace the cover panel.
Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.
The light is designed for use during cooking and not for general room illumination. Extended use of the light can
reduce the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating. Bulbs of a lower power
rating may be adequate for use, generally last longer and use less energy.
Spare bulbs are available from CDA Customer Care or from your local DIY shop.
INF
40W max candle bulb SES (screw type)
Table 1