14
6) Locate the support frame (trim piece);
apply a narrow bead of silicone sealant
to the underside of this (Fig. 7). Position
this around the cut-out in the worktop
(Fig. 8).
7) Lower the main body of the
downdraft extractor through the support
frame and into its fitted position.
8) Fix the downdraft extractor inside
the cabinet using the special fixing
brackets supplied (Fig. 9).
i) The brackets should first be
attached to the extractor body
in such a way that they leave a
gap of approx. 2mm between
the brackets and the base of the
cabinet.
ii) The screws fixing the brackets to
the cabinet base are then used to
pull the downdraft extractor firmly
into its final installed position.
Note:
Ensure that the downdraft
extractor unit is vertical and
perpendicular to the worktop before
fitting the brackets to the cabinet base.
Fig. 7
Fig. 8
Fig. 9
