CDA CDI6371 Use And Maintenance Download Page 34

Page: 34 / 36

Warranty and service

The manufacturer shall not be held liable for any damage caused by

improper use of the product.

• Repairs carried out by unqualified persons may seriously

endanger the appliance user

• Pursuant to Commission Regulation (EU) 2019/2023, The minimum

availability period for spare parts necessary to repair the appliance

is 7 or 10 years depending on the type and purpose of the spare

part

• The list of spare parts and the ordering procedure are available

on the websites of the manufacturer, importer or an authorised

representative

• The minimum warranty period for the appliance offered by the

manufacturer, importer or authorised representative is given in the

warranty card

• The warranty shall be void if you make any independent adapta-

tions or alterations, tamper with seals or other appliance safety

devices or its parts or interfere with the appliance contrary to

operating instructions

For more information about the product, please refer to the EU EPREL

Product Database at https://eprel.ec.europea.eu.

Alternatively you can use your mobile device to scan the QR code on

the energy label or enter the product model listed on the

energy label in the EPREL search engine.

Summary of Contents for CDI6371





































Search results

Summary of Contents for CDI6371

Reviews:

Related manuals for CDI6371

Brands by name

Popular brands

CDA CDI6371, Use And Maintenance

Search results

Summary of Contents for CDI6371

Reviews:

Related manuals for CDI6371

Brands by name

Popular brands