CDA CDI6371, Use And Maintenance

Page: 10 / 36

10
Changing a programme
It is possible to change the programme if necessary once the
programme has started.
• First open the door slightly to reduce the risk of water spillage.
• Press the Programme Selection button until the required
programme is shown on the display.
• Then close the door. The dishwasher will begin the new
programme from the point at which the old programme stopped.
Cancelling a programme
It is possible to cancel the programme once is has started.
• First open the door slightly to reduce the risk of water spillage.
• Press and hold in the Programme Selection button until the display
shows 1, then close the door.
• The dishwasher will run a drain cycle which will take approximately
30 seconds. Once this is complete, the dishwasher will beep 5
times.
Switching the dishwasher off
• Once the dishwasher beeps and the end of programme light
switches on, the dishwasher can be switched off by pressing and
holding the On/Off button for 3 seconds.
• Then turn off the water tap and remove the plug from the power
socket.
Please note: the dishwasher will automatically continue on the
programme it has started if the door is opened and closed or in the
event of a power cut.