6
GAS BURNERS
Gas flow to the burners is adjusted by turning the knob illustrated in fig. 3 which con-
trols the safety valves.
Turning the knob so that the indicator line points to the symbols printed on the panel
achieves the following functions:
✓
full circle
●
=
closed valve
✓
symbol
=
maximum aperture or flow
✓
symbol
=
minimum aperture or flow
The maximum aperture position permits rapid boiling of liquids, whereas the minimum
aperture position allows slower warming of food or maintaining boiling conditions of
liquids.
To reduce the gas flow to minimum, rotate the knob further anti-clockwise to point
the indicator towards the small flame symbol.
Other intermediate operating adjustments can be achieved by positioning the indicator
between the maximum and minimum aperture positions, not between the maximum
aperture and closed positions.
LIGHTING OF BURNERS
To ignite the burners follow these instructions:
– Lightly press the knob (fig. 4) in an anti-clockwise direction up to the maximum aperture
(symbol
); press the knob right down to prime the electric ignition until the burner lights.
In case of power cut manually light the burner.
– Adjust the burner according to the power required.
If the burner fails to ignite repeat the ignition with the knob on “minimum” position.
Figure 3
Figure 4
Use Of the Hob
