Cloud drive intelligent technology Co.,Ltd
Jim：（+86）18221324155
Page
10
of
26
(4) PAS level selection
When the display is power on, you can click
or
button to adjust the
PAS level which will
change the output power of the motor. The PAS level is
normally set at level 1 when you power on the display , you can adjust it from 0 to 5
.
The operation process is shown in figure 6-4:
Figure 6-4
(5)Display interface
Display will show: current speed, total distance, single distance, PAS level,
power, error code, motor power information and other modes.The current speed is
shown in figure 6-5.
Figure 6-5
