CCT730 V1.1
32
Appendix 1: Hard Disk Error Message
Some messages will be shown on the screen when the H.D.D. is unable to operate.
u
Message:
H.D.D. Detect Time Out
Symptom
: The system checks the H.D.D. but gets no response for over 30 seconds
Possible reason
: H.D.D. power on failure
Tip
: 1. Wait for the DVR to automatically reset the H.D.D.
2. Power off and on again
u
Message:
No Hard Disk
Symptom:
No HDD has been found by the system.
Possible reason
: 1. No H.D.D.
2. H.D.D. detects a failure
Tip
: 1. Insert a formatted (FAT 32) H.D.D.
2. Check the power/ IDE bus connectors, ensure they are connected
properly and then insert the H.D.D. again.
u
Message:
File System Error
Symptom:
The file system is not acceptable.
Possible reason
: The H.D.D. has not been formatted with the “FAT32” file system.
Tip
: Enter menu screens and reformat the H.D.D.
u
Message:
IDE Bus Error
Symptom
: IDE bus error or H.D.D. Master/ Slave jumper error.
Possible reason
: 1. The cable of IDE connectors may be damaged.
2. H.D.D. jumper may not be set to “Master”.
Tip
: 1. Check the cable of IDE connectors; it may be damaged.
2. Check the H.D.D. cable and ensure it has been connected properly to
the caddy.
3. Check H.D.D. jumper; the jumper must be set to “Master”.
u
Message:
Unknown H.D.D.
Symptom
: The H.D.D. format is not acceptable.
Possible reason
: The H.D.D. has been formatted with “NTFS” file system.
Tip
: Enter the menu screens and format the H.D.D. again.
u
Message:
H.D.D. Detect Error
