SUPER HIGH RESOLUTION WDR CAMERA
OSD Instruction
9) SPECIAL
6. Monitor Type
- Change the setting value of video appropriate to your monitor.
- LCD / CRT Monitor types are selectable.
7. FACTORY RESET
7. FACTORY RESET
- Go back to Factory Defaults for all setting values of OSD.
8. COMM SET (Communication Setting)
- To set up the camera communication status when controlling the camera with
external control device.
1. PROTOCOL : Pelco D protocol is supported as default.
2. Camera ID : You can give Camera ID from 0~255 with your desired position.
3. BAUD RATE : You can select Baud Rate from 4800 ~ 57600.
4. SAVE / REBOOT : In order to activate this function, save your desired setting value
and reboot the camera in order.
5. Previous : Go back to "Main Menu".
9. EXIT
- Press Set Button in the EXIT menu to save the current settings and exit Main Menu.
15
