2.3.2 Corner Mounted
Fig 11
Installation conditions:
Corner mounted dome can be used in the hard wall structure with an angle of 90° whose
thickness should be enough to install expansion bolt in indoor and outdoor environment. The
wall can bear at least 4 times the weight of the dome. Install corner mounted attachment and
wall hanging bracket:
a. As shown in fig 12, with the installation holes in the corner mounted attachment as pattern,
draw punched locations on the wall with an angle of 90°and punch to install expansion bolt.
Fig 12
b. As shown in fig 13, use M8 screw nut to fix the base of corner mounted on the wall with all
cables through the center holes of the corner mounted, marine glue and bracket. Enough wiring
length should be left.
Fig 13
