1
2
5
0
50
7
5
75
1
0
0
100
150
1
5
0
200
2
0
0
DUMMY
0
400%
0
300%
LFX2 Flat-Dome Light Advantages
Higher output for high-speed inspections
Compared to previous
models, the light is
approximately 4 times
brighter for red light and
approximately 3 times
brighter for white light at
the camera output.
B
ri
g
h
te
r
Previous
models
R
e
d
l
ig
h
t
Red LFX 2
Approx.
4
times
brighter at the camera
Approx.
3
times
brighter at the camera
Approx.
3
times
brighter at the camera
Previous
models
White LFX 2
Notes:1) The brightness depends on the spectral sensitivity characteristics of the camera.
2) The graphs provided in this pamphlet are for reference only. They do not guarantee product quality.
The LFX2 Series enables
bright imaging for
applications that could not
be handled with the lower
output of previous models.
Image Comparison with Previous Models (Red Light)
Previous Model
LFX2 Series
Object:
Cans
The output of the previous model
was too low for some applications.
Shutter speed: 1/4,000
With the LFX2, the output is
sufficient for proper imaging at a
shutter speed of 1/4,000.
Notes:1) The brightness depends on the spectral sensitivity characteristics of the camera.
2) The sample objects that are used were purchased and prepared by CCS, and are not intended to represent actual quality and performance.
Infrared light for a wide range of applications
Use these lights for a wide
range of applications from
visible light to invisible
infrared light.
The peak wavelength for
Infrared lights is 850 nm.
Imaging Comparison with Red Light
Red Light
Infrared Light
Object:
Instant Food
Package
The printed pattern is still visible,
making it difficult to see the
surface condition.
The printed pattern is completely
eliminated so that the surface
condition can be easily inspected.
Note: The sample objects that are used were purchased and prepared by CCS, and are not intended to represent actual quality and performance.
A Complete Lineup for Ideal Imaging
Models are available with five
emitting surface sizes: 50, 75,
100, 150, and 200 mm. Select
red, white, or infrared light.
In
fr
a
re
d
L
ig
h
ts
C
o
m
p
le
te
L
in
e
u
p
Emitting Surface Size
50
×
50 mm, 75
×
75 mm, 100
×
100 mm,
150
×
150 mm, 200
×
200 mm
LED Colors
Red
/ White /
Infrared
The LFX2 Flat-Dome Light
can be used for wide range of applications in many different fields.
High Output to be compatible with High-speed Cameras;
New Infrared Lights for Even More Applications
Application Examples
in Packaging
+
Missing part
inspections
Foreign object
inspections
The products are
uniformly lighted without
showing the printed
pattern on the packages.
Object
Product packs
containing 4 products
Light Used
LFX2-200RD (red)
Application Examples
in Food Industry
Foreign object
inspections
Light is transmitted
though tea leaves to
detect only foreign
objects.
Object
Tea leaves
Light Used
LFX2-200IR850 (infrared)
Application Examples
in Pharmaceuticals
Fault
inspections
The surface is uniformly
lighted to inspect the
edge or overlap of
transparent film.
Object
Throat lozenges
Light Used
LFX2-200RD (red)
Note: The sample objects that are used were purchased and prepared by CCS, and are not intended to represent actual quality and performance.
Obtaining the Quality Image
The dot pattern in the emitting surface can produce inconsistent images.
Reducing inconsistent images produced by dot patterns
1. Open the lens aperture slightly.
2. Focus on the object precisely.
3. Adjust the height of the Light. (Install it outside the focal depth.)
4. Adjust the light intensity. (Suppress reflections and shining.)
5. If the light is too bright, increase the shutter speed of the camera.
Ambient light can reflect from the surface of the Light or object, which can affect the captured image.
Preventing the effects of ambient light
1. Install a hood or otherwise to block the ambient light.
2. For red light, mount a Sharp-cut Filter on the lens.
3. Increase the shutter speed of the camera. (Close the lens aperture slightly.)
Application Precautions
The captured image can be affected by dirt and dust on the surface of the Light.
Preventing the Effects of Dirt and Dust
Handle the Light carefully to keep it clean from dirt, dust, and fingerprints.
Do not wipe off dirt or dust with your fingers. Blow them off with air.
If the Light becomes contaminated with fingerprints, wipe them off with a fine, soft cloth.
If the Light becomes very dirty, wipe it off lightly with a thin solution of neutral detergent.
Luminescent spots may result from foreign matter in the emitting surface. These are within CCS inspection standards and do not
indicate faults in the product.
W
h
it
e
l
ig
h
t
