Installation
Installation on a Frame
M5 screws
M5 nuts
Mounting to a frame
1
Use M5 screws
that are no more
than 6mm longer
than the thickness
of the mounting
surface.
M3 screws
M3 nuts
Mounting to a frame
2
Side Installation
Rear Installation
Insert the nut into the slit in the frame.
Required Parts
1
2
Fix the product with screw.
* Recommended tightening torque: 0.6 N m
* Determine the screw interval according to
the application environment and use a
suitable number of screws for installation.
Use M3 screws
that are no more
than 4mm longer
than the thickness
of the mounting
surface.
Cable bush
M4 screw
Do not use a screw with a big screw head
which interferes the cable bush.
MANDATORY
ACTIONS
Required Parts
Installation Using a Tap Hole
Tapped holes
M4 screws
* Recommended tightening torque: 0.6 N m
Direct Installation
Installation with Brackets
Fix the product with M4 screw.
Required Parts: Brackets
3
For information on applicable Control
Units and cables, refer to the product
catalogs or the CCS website.
Read the instruction guide of the
control unit before use.
Operating Instructions
Connect the light cable of the product
to the control unit output connector.
Make sure that the control unit is
turned OFF before connecting.
MANDATORY
ACTIONS
Turn ON the control unit to turn ON
the light.
Adjust light range, light angle, and
radiant quantity to optimize images.
Adjust the radiant quantity at the
control unit.
3
2
1
When using white LED lights
with color image processing
equipment, readjust the white
balance of the camera according
to the operating conditions.
MANDATORY
ACTIONS
4
Inspection object
Control unit
HLDL2 series
- Conceptual Diagram -
Insert the plug all the way into the connector.
SMP-03V-BC
SMP-03V-BC
ELR-02V
ELR-02V
Connector Connection Diagrams
If the light emitting surface of the Bar
Light is 150 to 450 mm, connect the
power output connector to an
SMP-
03V-BC
Connector.
If the light emitting surface of the Bar
Light is 600 to 1200 mm, connect the
power output connector to an
ELR-
02V
Connector.
HLDL2
Series
Bar Lights
Instruction Guide
Thank you for purchasing a CCS product. To ensure proper use of the product,
please read this instruction guide before use and keep it for your future reference.
Warning
Do not disassemble or modify the product.
Doing so may result in fire or electric shock.
DISASSEMBLY
PROHIBITED
LED light radiation may cause corneal or
retinal abnormalities if you look directly at
the light. To prevent harmful light exposure,
never look directly at the LED light.
MANDATORY
ACTIONS
Do not touch the product with wet hands.
Doing so may result in electric shock.
DO NOT TOUCH
WITH WET HANDS
This product generates high temperatures.
Do not touch the product while it is turned on
or immediately after it is turned off, or burning
may result. Provide cooling with a fan or
other ventilation if the product is to be used in
a closed space.
MANDATORY
ACTIONS
Make sure that the product is free of moisture
or any liquid. Exposure to water may result in
fire, electric shock, or product failure.
DO NOT SUBJECT
TO MOISTURE
Connect or disconnect the light cable only after
turning off the LED light. Failure to do so may
result in circuit damage, fire caused by a minute
spark, or electric shock.
MANDATORY
ACTIONS
If abnormal condition occurs such as fuming,
heat, smell, noise, or so on, stop using the product
immediately, and turn the power off. A fire or
electric shock may result if the product is kept used.
MANDATORY
ACTIONS
Caution
Do not use user-made cables. Doing so may
cause product failure. Use the CCS extension
cable if it is necessary to extend the distance
between the light and the control unit.
PROHIBITED
Use a control unit that is suitable for the
product ratings. Using an incorrect control unit
can cause product failure.
MANDATORY
ACTIONS
Be careful of static electricity.
Damage to the LED light may occur, if a
person charged with static electricity touches
it. Keep the product away from all items
charged with static electricity.
PROHIBITED
Use a standard Extension Cable that is
manufactured by CCS. If the cable is too long,
the voltage across the Bar Light will drop due
to the DC resistance of the cable, and the light
intensity will decrease.
MANDATORY
ACTIONS
Do not drop the product or subject it to
impact. Doing so may cause the product to
malfunction.
PROHIBITED
The following symbols in the instruction guide indicate and classify the precautions.
These symbols indicate prohibited actions.
This symbol indicates required actions.
DO NOT TOUCH
WITH WET HANDS
PROHIBITED
MANDATORY
ACTIONS
DO NOT SUBJECT
TO MOISTURE
DISASSEMBLY
PROHIBITED
The following symbols are used in this instruction guide to indicate and classify
the relative importance of warnings and cautions.
Warning
Indicates that incorrect usage
may result in serious injury or
death.
Caution
I n d i c a t e s t h a t i n c o r r e c t
usage may result in injury or
property damage.
Incorrect usage of the product may result in fire, electric shock, or other serious damages.
Please ensure to follow the conditions below.
Use the product under the following conditions.
Using the product under any other conditions may damage the product.
Operating temperature: 0 to 40°C, Humidity: 20 to 85%RH (with no condensation)
Storage temperature: -20 to 60°C, Humidity: 20 to 85%RH (with no condensation)
Please install the product to locations with following conditions.
Incorrect installation location may cause product failure.
In a flat and stable location with minimal vibration.
Well-ventilated places with minimal dust.
Places that are not subject to sudden temperature
changes.
Places free from any water, oil, liquid, chemical, or steam.
Places free from corrosive or combustible gas.
Places away from water faucets, boilers, humidifiers,
air conditioners, heaters, or stoves.
Do not use the product in the following situations.
Under conditions or in an environment not described in this instruction guide.
In nuclear energy control systems, railroad systems, aviation systems, vehicles, combustion equipment,
medical equipment, amusement machines, or safety equipment.
In applications involving serious risk to life or property, particularly applications demanding a high level of safety.
Important Information for Equipment Safety
- Read Before Use -
1
Confirming Product Information
HLDL2-300×45RD-DF-N
600103-012345
24V/28W
MADE IN JAPAN
Tag example
Back
Front
2
The following tag is attached to the cable on the LED Light. The color of the label indicates the
luminescence color of the Light. The back of the tag there is a name label that gives the model
number, power consumption, and serial number. Be sure to check the contents before using the
product and handle the label with care. If the label is missing or damaged and the contents cannot
be checked, please contact CCS Inc.
