6
0RXQWLQJJXLGHOLQH
1.
,QVWDOOWKHVHQVRUDWOHDVWPRႇWKHJURXQGIRU
better and more accurate wind measurements.
2. Choose an open area within 150 meters from the
main console.
3. Install the sensor as level as possible to achieve
accurate rain and wind measurements. Use the level
indicator on the sensor to ensure a level installation.
4. Mount the sensor with the wind meter end pointing
to North to correctly orient the direction of the wind
vane.
0$,1&2162/(
%DFNXSEDWWHU\LQVWDOODWLRQ
1. Remove the battery door of the main console.
2. Insert 3 new AAA batteries.
3. Close the battery door.
3RZHULQJXSWKHFRQVROH
1. Plug the adaptor into the DC jack.
2. Press
>5(6(7@
key to re-start the console.
3. After reset, all LCD segments will show. The console will enter AP (access point) mode and
the status LED will turn on green.
The Console status LED can show the following status:
6WDWXV
/('VWDWXV
AP mode for setup
Flash green light
&RQQHFWHGWR:L¿URXWHU
Blue light
6HDUFKWKH:L¿URXWHUDQGIDLOFRQQHFWLRQ
Flash blue light
Firmware update
Flash red light
Manual sensor pairing mode by pressing
>:L¿6(1625@
key
Flash cyan light
Refresh the upload data and sync internet time by press
>5HIUHVK@
key
Flash purple
Mounting pole
and stand are
not included
