5
,167$//$7,21$1'6(783
:,5(/(66,1'2256(1625
3DLULQJWKHZLUHOHVV,QGRRUVHQVRUZLWKWKHFRQVROH
1. Remove the battery door of the sensor.
2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the
right way according to the polarity information marked on the battery compartment.
3.
&ORVHWKHEDWWHU\GRRU7KHWUDQVPLVVLRQVWDWXV/('ZLOOEHJLQWRÀDVKHYHU\PLQXWH
1RWH
-
,I\RXQHHGWRUHDVVLJQWKHVHQVRUFKDQQHO¿UVWO\VOLGHWKHFKDQQHOVOLGHVZLWFKWRWKH
new channel that you decided, then press
>6(1625@
key on the console, and then press
>5(6(7@
key on the sensor to pair the sensor with the console again.
- Avoid placing the sensors in direct sunlight, rain or snow.
- To avoid the sensor/s and console pairing failure during new console setup, please power
XSWKHVHQVRUV¿UVWDQGWKHQSUHVV
>5(6(7@
key on the main unit (no need on sensors).
3ODFLQJWKHZLUHOHVV,QGRRUVHQVRU
Place a screw on the wall that you wish to hang the sensor on. Hang
the sensor onto the screw by the wall mounting holder. You can also
place the sensor on a table by itself.
:,5(/(66,16(1625
Your wireless 6-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV index,
temperature and humidity for you.
3DLULQJWKHZLUHOHVV,1VHQVRUZLWKWKHFRQVROH
1. Unscrew the battery door at the bottom of the unit and
insert the batteries according to the polarity information
marked on the battery compartment.
2. Screw on tightly.
3. Once the batteries are installed, the transmission status
/('ZLOOEHJLQWRÀDVK
1RWH
-
Ensure the battery door screw locked well.
-
(QVXUHWKHWUDQVPLVVLRQVWDWXV/('LVÀDVKLQJHYHU\
seconds.
3ODFLQJWKHZLUHOHVV,1VHQVRU
Install the wireless 6-IN-1 sensor to an open location with no obstructions above and around
the sensor for accurate rain and wind measurement. Install the sensor with the wind meter
end facing North and properly orient the wind direction vane. Secure the mounting stand and
EUDFNHWLQFOXGHGWRDSRVWRUSROHDQGDOORZPLQLPXPPRႇWKHJURXQG