IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User
Manual
31
Call Recipient 1-5
: Select the recipients that must be called when the “Call” on
the door
station is pressed. These fields are empty by default.
Relay Out 1 (DTMF)
: set the value of the DTMF signal. The relay outputs will close
when the signal is received. For example, the door will open when the specified
phone button is pressed.
Call timeout
: the amount of time during which the door station will call the
subscriber.
Receive incoming calls
: Automatically receive incoming calls using the SIP
account(s). If the receiving account is not available the door station cancels the
call and send the cancel message to the caller.
Use call melody
: use standard call melody instead of the phone ringing sounds
when calling recipient via SIP.
Answer without sound
: when enabled the call recipient will see and hear the
guest but the guest will not be able to hear the recipient or be aware that the
connection has been established.
Enable sound with command (DTMF)
: set the value of the DTMF command
(available symbols: 0-9, #, *) used to enable sound transmission from the recipient
to the guest.
End SIP session by pressing “Call” button
: Enables the subscriber on the door
station side to end the SIP session by pressing the “Call” button. This option can
be used
during the call
or
during the talk
. Both options are enabled by default.
Click [Save] to apply new settings.
6.4.7 PORT Settings
The PORT interface displays the ports camera use.Users can modify RTSP,Http
and Video port
