CCI.Control
CCI.Control
– Operation
68
4.4.2.2
Add new task
To add a new task, proceed as follows:
1. On the touchscreen press on the "Add new" button (F10).
→ The following operating screen opens:
2. In the operating screen, select all parameters one after the other.
3. To do so, press the relevant parameter on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
4. Enter the task name via the keyboard on the touchscreen and select the
remaining information from the respective lists.
5. Confirm your entry with "OK".
Note
The city is assigned via the customer and cannot be selected individually.
Note
The crop type and crop variety are assigned via the field and cannot be selected
individually.
Note
The task status is automatically displayed.
Note
The technique is dependent on the agricultural practice and can only be selected if
an agricultural practice has already been selected.
Summary of Contents for CCI 50
