Installation Guide
Hosted UC Installation Manual
Consult Build Transform Support
Connect the other end of the Ethernet cable provided in the phone installation kit to the
network port of the new phone (circled in red). If there was a cable in the PC port of
your existing phone, connect it to the PC port of the new phone (circled in green).
Connecting the power cord
If your phones are not powered over Ethernet (this is determined by type of network
switch), you will need to connect the 48 volt power adapter to the power port on the
back of each phone (highlighted in green) Plug the other end into an electrical outlet.
Pag
e
10
