34
The Polarization can be vertical (13V) and horizontal (18V)
4.3.1.1.4 22 KHz
By switching “ON” and “OFF” on the pull-down list, users can switch the
satellite which provides signal input.
4.3.1.1.5 LNB Frequency
Users have four LNB frequency choices: 5150MHz, 9750 MHz, 10600 MHz
and 11300 MHz. Users should select one of them to input. Before inputting,
users should select one LNB frequency from the four choices and minus the
satellite frequency. If the result does not locate in range 950MHz~2150MHz,
then users should select another one to make calculation. If the result locates
in range 950MHz~2150MHz, then the selected LNB frequency is the right
choice selected and it can be input here.
4.3.1.2 IP Setting
After entering below interface, user can set the Input IP Address and Port.
The Input IP Address and Input port should be matched with the IP source
device. Once done, please click
to make the current parameters and
then click
to save the parameters permanently to the device’s
flash.
Summary of Contents for CBS-IP-IRD-S2-LCD
Page 1: ...CBS IP IRD S2 LCD User s Manual...
Page 38: ...37...