11
2.4.2
CBS-IP-IRD-S2-LCD
Satellite Receiver Signal Cable
Connection Illustration:
RF IN and LOOP OUT Connection Illustration:
Users can find the RF IN and LOOP OUT interface on the device according to
the connector mark described on the rear panel illustration, and then connect
the cable. One end is connected to the RF IN interface of satellite receiver
while the other end is connected to the satellite signal source equipment or
LOOP OUT interface of the previous satellite receiver when several satellite
receivers are series connection. As follows:
ASI IN and ASI OUT Connection Illustration:
Users can find the ASI IN and ASI OUT interface on the device according to
the connector mark described on the rear panel illustration, and then connect
the cable. One end is connected to ASI IN interface of the
CBS-IP-IRD-S2-LCD
,
the other end is connected to any device that has ASI output, while when
connected ASI OUT interface, the other end of the wire is generally
connected to encoder and multiplexer. As follows:
Summary of Contents for CBS-IP-IRD-S2-LCD
Page 1: ...CBS IP IRD S2 LCD User s Manual...
Page 38: ...37...