C
OMPONENT
M
AINTENANCE
M
ANUAL
S
OAP
D
ISPENSERS
S
EIFENSPENDER
B82X
S
ERIES
No.: 25-40-01
Issue: D
Date: May 02/2022
25-40-01
May 02/2022
(c)
Remove O-ring (20) from piston (10).
NOTE:
Remove and discard placard only when damaged, loose
or if another language is required.
C.
Disassembly of B825 version (Ref. IPL, Fig. 1J, 1K and Fig. 2A)
(1) See B828 version below.
D.
Disassembly of B828 version (Ref. IPL, Fig. 1J, 1K and Fig. 2A)
(1)
Remove clamps (1-50) and tube (1-80) from container (1-60).
(2)
Remove tube (1-80), sleeves (1-90) and flexible metal pipe
(1-100).
(3)
Separation of Piston Assy from Shank Assy.
(a)
Unlock cover (2-60) and separate piston assy (1-10) from
shank assy (1-40).
NOTE:
For procedure refer to chapter SERVICING.
(4)
Disassembly of Piston Assy (Ref. IPL, Fig. 2A)
(a)
Remove guide key (80) from cylinder (90).
(b)
Separate piston (10), spring (30), washer (70), duck
valve (50), cover (60) from cylinder (90) with bonded
adjusting washer (40).
(c)
Remove O-ring (20) from piston (10).
NOTE:
Remove and discard placard only when damaged, loose
or if another language is required.
E.
Disassembly of Shank Assy (Ref. IPL, Fig. 3A)
(1)
Remove lock ring (30) from shank (10).
(2)
Remove spring (20) from lock ring (30).
(3)
Remove retaining nut (70), tooth lock washer (60), rubber
washer (50) and metal washer (40) from shank (10).
PAGE 3002