CBS 644-0027, Component Maintenance Manual With Illustrated Parts List, Page: 18 / 47

C
OMPONENT
M
AINTENANCE
M
ANUAL
S
OAP
D
ISPENSER
S
EIFENSPENDER
P/N 644-0027
No.: 25-40-04
Issue: A
Date: Oct 01/2013
25-40-04
Oct 01/2013
TESTING AND FAULT ISOLATION
1. GENERAL
A. This section contains testing and fault isolation for the Soap
Dispenser.
B. The procedures given below must be completed if a failure is found
with Liquid Soap Dispenser during use, or to make sure that the unit
is serviceable before it is put into or put back into service.
C. Carry out all procedures in a clean area to avoid scratches or other
damages of any part.
D. Numbers in parenthesis following item names in the procedures refer
to the figures and item numbers in page-block 10001, ILLUSTRATED
PARTS LIST.
E. Make a visual inspection of the Liquid Soap Dispenser as detailed in
page-block 5001, CHECK.
2. LIST OF POSSIBLE DEFECTS
NOTE: Ensure that soap bottle is filled. If the unit does not
discharge any soap and defects listed below are not
determinable, replace soap bottle (Refer to chapter SERVICING).
FAULT PROBABLE CAUSE CORRECTION ACTION
NO, OR INSUFFICIENT
SOAP DISCHARGE
UNIT CAN NOT BE CLOSED
A. PUMP OF THE
DISPOSABLE SOAP
BOTTLE MIGHT BE
LOOSE OR BROKEN
B. COVER IS BROKEN
C. HOLDER IS BROKEN
D. DISPOSABLE SOAP
BOTTLE IS TOO LARGE
- CHECK CONNECTION
BETWEEN PUMP AND
BOTTLE; IF FAULT
CONSIST REPLACE
FAILING BOTTLE WITH A
NEW ONE
- REPLACE COVER
- REPLACE HOLDER
- REPLACE DISPOSABLE
SOAP DISPENSER BOTTLE
WITH A NEW SOAP
DISPENSER BOTTLE WITH
THE CORRECT SIZE
FAULT ISOLATION CHART
TABLE 1001
PAGE 1001