CBS Products C-823-13, Operating And Maintenance Manual, Page: 7 / 36

7
33. When towing always ensure that the drum frame locking pins are fitted and
secured with R clips.
34. The trailer should be in a level position when towing (Chassis side members in
a horizontal attitude).
35.
Prior to transit always ensure that the trailer has a positive Nose
Weight at the towing coupling and does not exceed the maximum
specified in Section 4.
36.
Ensure the nose weight is within the limit of the towing vehicle.
37. Ensure that both of the rear props are in the raised position during transit.
38. Ensure rear prop locking pins are fitted and secured using R clips when in
transit and during operation.
39.
Before towing the trailer, connect breakaway cable to towing attachment on
towing vehicle, ensure that is passes through the hole in the front chassis
support bracket, check the condition, if frayed, kinked or damaged, replace
immediately.
40. When towing always ensure that the jockey wheel is facing to the
rear, fully retracted such that the wheel is no longer free to rotate
and is fully raised into the chassis and secured.
41.
The drum trailer must not be operated until full training and
compliance with the directives of this Operator Instruction Manual
and the Operator Instruction Manual for any the equipment to be
used in conjunction with has been fully completed.