Page | 4
RSA-23 Installation and Operation
1.1 RSA-23 Adjustment Locations
ATTENTION!
To ensure the proper installation and operation of the RSA-23 and the switchgear,
the RSA may need to be slightly adjusted to fit each cabinet.
Step 1: If the shaft of the trip rod is failing to
trip the breaker, the travel may be adjusted
to account for slight variances with each
breaker. To adjust the travel, loosen the bolt
on the motor stop and slide in or out until
the proper position has been found.
Retighten the bolt before operating the
RSA-23.
