Page | 2
RSA-23 Installation and Operation
1.0 Installation
DANGER!
*Ensure that the switchgear to be remotely operated matches the switchgear
discussed on the first page. If the switchgear does not match, please contact CBS
ArcSafe® for more information regarding remote switching applications for your
particular model.
Step 1: Ensure there are no obstructions
around the switch before installation of the
RSA-23.
ATTENTION!
The location of certain items such as
mimic bus, stickers, and/or placards
may interfere with the installation
of the RSA. These items may need
to be removed or repositioned for
proper RSA installation.
Step 2: Place the RSA-23 over the
serial plate and ensure the two
locators are positioned flush with the
serial plate escutcheon, as seen in
the figure to the right.
