RRS-4 Technical Manual 7/20/2011
6.
Configure
– Navigates the operator to data modification options pertaining to
operator’s selection of Test/No Test; in Figure 25 , the operator would be
modifying data related to the Test position
6.1.5 Breaker Setup Configuration Data for the Test/No Test Position
In the next screen (Figure 26), all options available while in the Test position (No Test, if
selected) are displayed in a list. Navigate to the required option via the up/down arrows
(Figure 26.11/12) or simply press the option to highlight it. Select the option by pressing
the enter arrow (Figure 26.14) at the bottom. Press "Esc" (Figure 26.13) to go back.
1.
Back
– Navigates operator back to the Test/No Test position screen
2.
Disc. To Conn
– Navigates operator to the Disconnect to Connect position
operation data modification screen
3.
Conn to Disc.
– Navigates operator to the Connect to Disconnect position
operation data modification screen
4.
Direction
– Navigates operator to install/remove direction modification screen
5.
Speed Setup
– Navigates operator to modifying the unit speed of operation
6.
Clutch Setting
–Navigates operator clutch setting modifications
7.
ESD
– Emergency Stop Depress
Figure 26: Data configurations for the Test position
1
2
3
4
5
6
7
8
9
10
11
12
