RRS-4 Technical Manual 7/20/2011
4.
Test/No Test Selection Indicators
– The two indicators shown in Figure 21 allow
the operator a quick and easy way of knowing which of the Test and No Test
options are selected; In Figure 21, the Test indicator is highlighted signaling that
the Test operation is selected
5.
GE 1200
– The name of the selected breaker is displayed here; in Figure 21, the
selected breaker for data modifications is GE 1200
6.
Configure
– Navigates the operator to data modification options pertaining to
operator’s selection of Test/No Test; in Figure 21, the operator would be
modifying data related to the Test position
6.1.2 Unit Setup Configuration Data for the Test/No Test Position
In the next screen (Figure 22) all options available while in the test position are
displayed in a list. Navigate to the required option via the up/down arrows or press it to
make it highlighted. Continue to that option by pressing the enter arrow at the bottom.
Press "Esc" to go back.
Figure 22: Data configurations for the Test position
1
2
3
4
5
6
7
8
9
10
.
11
12
13
14
